Menu
Your Cart

Sea&Sea MDX-α7II for SONY a7II

Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II
Sea&Sea MDX-α7II for SONY a7II

[Description]

  • The Optical YS Converter can be installed in the housing
  • Compatible with both the VF180 1.2x and VF45 1.2x viewfinders
  • Diopter-adjustment dial
  • Compatible with FE series lenses designed for full-frame sensor cameras
    • In addition to various E-mount lenses, the camera and housing are compatible with FE series lenses for full-frame image sensor cameras via the ML-NX Conversion Ring 30.
  • Luminescent Symbols
  • Equipped with movable Focus/Zoom gear
  • Main dials are equipped with damper springs
  • Equipped with two fiber-optic cable sockets.
  • All camera functions can be used underwater.
  • The camera's LCD monitor can be tilted up to 10 degrees.
  • Front case equipped with a lens-lock release button. This allows lenses to be changed easily without opening the housing.
  • The housing has two accessory ports. One is designed for N-type (two-pin connected) strobe connector and the other is designed for HDMI output.
  • The port lock can be activated (lock and unlock) from outside the housing.
  • The camera's lens-lock release button is accessible from the outside of the housing.
  • The multi-selector has been positioned on the right side of the rear case making it easily accessible while holding the grip, just like operating the camera directly.
  • Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to avoid electrolysis damage. Sacrificial Zinc Anode (2 pieces)
  • The mounting screw hole is located on the centre underside of the housing.
  • Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders may be used.
  • Built-in leak sensor immediately alerts you to water ingress.
  • A depth rating of 100m / 330ft makes the housing ideal for tech diving.

[Specification]

[Construction] Body: corrosion-resistant aluminum alloy (machined)  / Grip: corrosion-resistant die-cast aluminum alloy
[Depth rating] 100m / 330ft
[Dimensions (WxHxD)] 325 x 160 x 104mm / 12.8 x 6.3 x 4.1 inches
[Weight] Approx. 2,250g / 79.4oz. - Without grips: 1,860g / 65.6oz 

[Manual / Port Chart]

Write a review

Please login or register to review
US$2,529
  • Stock: In Stock
  • Model: 06176
  • Weight: 2.23kg
  • Dimensions: 32.50cm x 16.00cm x 10.40cm