Brand: Ikelite
Model: 4081.6
[Description]
Mounts to the top of an Ikelite DSLR featuring 1/4-20 top mount for attachment to 1 in diameter ball arms from Ikelite, TLC, Ultralight, Nauticam and others. Requires a compatible 1-inch Ball Clamp, sold separately. (like ULCS AD-1420-IK)
1 in (25.4 mm) diameter ball
..
Call
Brand: Ikelite
Model: 4081.31-ba-ik
[Description]
Mounts to our Quick Release Handle for attachment of 1-inch diameter ball arms from Ikelite, TLC, Ultralight, Nauticam, and others. Requires a compatible 1-inch Ball Clamp, sold separately. (like ULCS BA-IK)
1 in (25.4 mm) diameter ball
Type III hard coat anodized alu..
Call
Brand: Ikelite
Model: 4081.3-ba-ik
[Description]
Mounts to our Quick Release Handle for attachment of 1-inch diameter ball arms from Ikelite, TLC, Ultralight, Nauticam, and others. Requires a compatible 1-inch Ball Clamp, sold separately. Extended length allows for the attachment of the EV Manual Controller. (like ULCS BA-IKT)
..
Call
Brand: Ikelite
Model: 4081.72
[Description]
Ball Mounts to the center of an Arm.
Works with 1-inch ball arms from Ikelite, TLC, Ultralight, Nauticam, and others.
Old and new Ikelite 1-inch balls and clamps are interchangeable. For the best performance, we recommend combining like components within a single clamp (two..
Call
Brand: Ikelite
Model: 4069.1
[Description]
With our line of excitation and barrier filters, you can convert your powerful Ikelite DS161, DS160, or DS125 strobe into a fluorescence set-up. No need to purchase expensive specialty lights or guided dives. Be the explorer!
[What's included]
Excitation Filter
..
US$195
Brand: Ikelite
Model: 4069.2
[Description]
This domed diffuser for DS161, DS160, and DS125 type strobes provides the softest, widest coverage possible. This combination of material and shape spreads light wider than a traditional diffuser and has a higher transmissivity to let more light through.
There is no cooling eff..
Call
Brand: Ikelite
Model: 45021
[Description]
Non-coiled 1 ft (30 cm) long extension cord with Ikelite-style bulkhead on one end and Ikelite-style strobe plug on the other end. Use to position your strobe in a location farther from your housing than accommodated by a normal coiled cord.
Communicates TTL signal when used wi..
Call
Brand: Ikelite
Model: 45025
[Description]
Non-coiled 15 ft (450 cm) long extension cord with Ikelite-style bulkhead on one end and Ikelite-style strobe plug on the other end. Use to position your strobe in a location farther from your housing than accommodated by a normal coiled cord.
Communicates TTL signal when used ..
Call
Brand: Ikelite
Model: 45023
[Description]
Non-coiled 3 ft (90 cm) long extension cord with Ikelite-style bulkhead on one end and Ikelite-style strobe plug on the other end. Use to position your strobe in a location farther from your housing than accommodated by a normal coiled cord.
Communicates TTL signal when used wi..
US$110
Brand: Ikelite
Model: 4401.3
[Description]
Converts the electrical bulkhead of any Ikelite DS strobe into a fiber optic port.
This adapter is a manual exposure (non-TTL) trigger only. The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model).
An individual Fiber..
US$150
Brand: Ikelite
Model: 4405
[Description]
The High Sensitivity Optical Slave Converter is perfect for use in environments with high ambient light or large distances between your remote strobe and the primary flash.
This is a non-learning, sensor which requires the camera to be in manual flash mode. This Converter w..
US$150
Brand: Ikelite
Model: 4403
[Description]
Trigger your Ikelite DS-series strobe off any camera or strobe flash.
The Optical Slave Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote trig..
US$150