Ikelite High Sensitivity Optical Slave Converter for Remote Triggering of DS Strobes

[Description]

The High Sensitivity Optical Slave Converter is perfect for use in environments with high ambient light or large distances between your remote strobe and the primary flash.

• This is a non-learning, sensor which requires the camera to be in manual flash mode. This Converter will not work with a preflash. The Optical Slave Converter supports manual exposure modes as set on the attached DS strobe. TTL exposure mode is not supported.
• Support High Speed Shooting (4FPS)
• The Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering. 
• An optional 3-foot Extension Cord # 4102.03 may be added for more flexible positioning of the sensor window. This set-up is perfect for creative backlighting in wrecks, caves, and pool use. It can also be used above water for studio photography work.
• This product replaces the Optical Slave Converter # 4403.

[Specifications]

1.1" diameter x 2.7" (28 x 69 mm)
Weights 1.6 oz (45 g)
Depth rating 300 ft (90 m)