[Description]
Sea&Sea recommend this viewfinder for near-sighted users and for photographers who want to make sure the focus is clear in the center of the image during macro photography. You can interchange this viewfinder with the standard pickup viewfinder to best suit your needs.
* The..
[Description]
Reduces vignetting in the viewfinder’s image. Recommended for wide-angle photography or other situations when it is essential to check the overall composition of the picture. Depending on the situation, the viewfinder can be replaced with a standard pick-up viewfinder.
*T..
[Description]
Standard viewfinder that provides good visibility for the entire field of view.
*The reflected image appears in the four corners of the viewfinder...
[Description]
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s). TTL and manual modes can be switched by pushing the mode switch o..
[Description]
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s). TTL and manual modes can be switched by pushing the mode switch o..
[Description]
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s). TTL and manual modes can be switched by pushing the mode switch o..
[Description]
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s). TTL and manual modes can be switched by pushing the mode switch o..
[Description]
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s). TTL and manual modes can be switched by pushing the mode switch o..
[Description]
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s). TTL and manual modes can be switched by pushing the mode switch o..
[Description]
Sea&Sea Optional Syn Cord 2-pin Connector #50122
User replaceable 2-pin strobe connector and sync connecter set. The connector set can be fixed after removing cap for accessory port.
* The connector set is required to connect the YS series strobes via sync cord to SEA&..
[Description]
Sea&Sea Optional YS Converter / C 6-pin Connector #50121
User replaceable 6-pin strobe connecter and sync connecter set. The connecter set can be fixed after removing cap for accessory port.
* The connector set is required to connect the YS Converter/C to SEA&SEA ho..